Music Rigs

Because electric guitars are very different in how they produce sound, the body electric guitar is constructed very differently to the acoustics of a or classical. In a classical guitar strings, when pulled or beaten, resonate, vibrate the air inside the body cavity. This cavity of the hollow body vibrates with the sound of the strings, and amplifies the notes. In an electric guitar but the sound is amplified only by an external amplifier, electronic, and so the body an electric guitar sound is often, as no vibration or air cavity is needed. In fact, without the external amplifier to the sound of an electric guitar by itself is quite unfortunate. The body electric guitar is usually made of wood, although the guard selection is normally made of plastic.

Before to the 1970s guitars are often made from a solid piece of hardwood, but in the last thirty or forty years, world population has been so wooden exhausted the search for a piece big enough and suitable for a guitar body is not only difficult, but very expensive. Therefore, today, most of electric guitar bodies are made of at least two pieces of hardwood, with a seam that connects together running through the center of the body. The most commonly used wood for body construction include basswood electric guitar maple, ash, poplar, and mahogany, which provide a solid and firm that it is unlikely that not deform or bend, as a result of any moisture, constant pressure or steel strings. When you look at a guitar, not always obvious what type of wood is used, and this is because normal hardwoods, by the very nature of wood, less graphics.

To create a visually striking and attractive appearance, designers and manufacturers of electric guitars tend to apply a very thin piece of wood more attractive to outside the body, to create an attractive wood finish, preserving the body of solid wood. Typically, these coatings veneer, which are usually attached to the main body, are made of hardwoods like maple, generally produces a striking effect of fire, and guitars that use this aspect through the use flame maple flame top guitars are known or simply tops flame. "For a number of other guitar parts should be attached firmly to the body of an electric guitar, the wood tends to be uprooted and sent to accept these other elements in slot for an acoustic or classical guitar, the interior is accessible to attach support to enhance the strength of these additional components, such as the bridge and neck, but as the body of an electric guitar is solid, this is not possible.

Today, there are some electric guitars are by not using wood in construction at all, but alternatives are the use of modern, usually synthetically produced. These alternatives to wood are composites carbon and even plastic-based materials such as polycarbonate. In some cases, electric guitars are made with aluminum alloy, which at the same time very strong, is also very light. Electric guitars, more than most other types of guitar, usually decorated and designed both the appearance and quality sound, and what the body electric guitar is often lacquered and polished to a high shine, to adjust the effect of wood, or simply produce a more even appearance vibrant. Often electric guitar bodies are decorated with fancy designer labels or reason to create a strikingly visual instrument, and one strong enough to withstand heavy use.

About the Author:

Victor Epand is an expert consultant for electric guitars, classic guitars and flame tops. You can find the best marketplace at these sites for electric guitars, classic guitars and flame tops, sheet music, guitar tab, and home theater audio.

Article Source: ArticlesBase.com – The Difference Between Electric Guitar Bodies And Acoustic Bodies

Custom guitar body